Straumann Bridge Bar Abutments

[Boabab]

Found this very old posts on Hybrid Screw Retained bridges.
I'm using exocad. Is it possible yet inhouse to make a bridge for Straumann Bonelevel to mill a cone shape that fits on a multi unit that is kept in place with a screw?
Problem with metal variobase is that only variobase is torque to implants but not the frame. I would like to design frame that is screwed in.
Any advise?

 

[CoolHandLuke]

Pretty sure theres a 2connect for that

 

[2thm8kr]

Found this very old posts on Hybrid Screw Retained bridges.
I'm using exocad. Is it possible yet inhouse to make a bridge for Straumann Bonelevel to mill a cone shape that fits on a multi unit that is kept in place with a screw?
Problem with metal variobase is that only variobase is torque to implants but not the frame. I would like to design frame that is screwed in.
Any advise?

Not sure if there is a Straumann library for it in exocad, but there are Variobase abutments (NC pn: 022.0000, RC 022.0001) that accept Variobase coping/cones for NC/RC.


*edit
There is a Straumann library for exocad that includes Variobase and copings.
Straumann library V2.0 20180909

 

[Boabab]

Thank you for your advise I'll give it a try.